Guantes examen nitrilo alto riesgo talla L (8-9) GNAR3. Caja 100 unidades
Guantes examen nitrilo alto riesgo talla L (8-9) GNAR3. Caja 100 unidades
Guantes examen nitrilo alto riesgo talla L (8-9) GNAR3. Caja 100 unidades
  • Guantes examen nitrilo alto riesgo talla L (8-9) GNAR3. Caja 100 unidades
  • Guantes examen nitrilo alto riesgo talla L (8-9) GNAR3. Caja 100 unidades
  • Guantes examen nitrilo alto riesgo talla L (8-9) GNAR3. Caja 100 unidades
Referència: 41206

Guants examen nitrilo alto riesgo largos talla S GA0102. Caja 50 unidades

Categoría III
Grosor: 0'20 mm
Color azul
Sin polvo
Extralargos, 30 cm (cubren el antebrazo)

7,00€ Base imp.
8,47€ amb IVA
Cantidad

 
Envío gratuito

desde 120€ + IVA

 
Envío

en 24 - 72 h

 
Pago

Tarjeta - Paypal - Transferencia - Domiciliación

Compliant with: Personal Protective Equipment Regulation (EU) 2016/425

EN ISO 374-1:2016

EN ISO 374-1:2016EN374-4: 2013 (%)
NaOH 40% (K) 6 -78.9

EN37-4:2013 Degradation levels indicate the change in puncture resistance of the gloves after exposure to the challenge chemical.

Level123456
Time >10 >30 >60 >120 >240 >480

This information does not reflect the actual duration of protection in the workplace and the differentiation between mixtures and pure chemicals. The chemical resistance has been assessed under laboratory conditions from samples taken from the palm only and relates only to the chemical tested. It can be different if the chemical is used in a mixture.

It is recommended to check that the gloves are suitable for the intended use because the conditions at the workplace may be different from the type test depending on temperature, abrasion and degradation. When used, protection gloves may provide less resistance to the dangerous chemical due to changes in physical properties. Movement, snagging, rubbing, degradation caused by the chemical contact etc. may reduce the actual use time significantly. For corrosive chemicals, degradation can be the most important factor to consider in selection of chemical resistant gloves.

Before usage, inspect the gloves for any defect or imperfections.

EN ISO 374-5:2016
Bacteria Fungi Virus

The penetration resistance has been assessed under laboratory conditions and relates only to the tested specimen.

 

PPE certification (2016/425 #B & #C2) provided by: SATRA Technology Europe, Bracetown Business Park, Clonee, D15 YN2P, IRL (2777)

Compliant with: Medical Devices Regulation (EU) 2017/745

Class 1 Medical Device

Other information

Contains accelerators which may cause allergic reactions.

Fit for special purpose: gloves are designed to be tight fitting to the hand, therefore they may not meet the requirements of EN420.

Food safe.
Single use only.
Non-sterile.
Does not contain latex.
Store between 5 and 40 degrees Celsius.
Store in dry conditions.
Store away from direct sunlight and heat.
Packaging is recyclable.